Camrose Waterworks System

Approval Number: 00000482 03 00
Summary Report for September 2016

The following table provides more detailed information regarding the monthly bacteriological report. The test for most parameters will result in a numeric value (i.e. .85mg/L). However the result for the test for some parameters, such as coliform bacteria or E. coli (Escherichia coli) will be whether they exist in the drinking water sample (present) or they do not exist in the sample (absent). The desired result for these parameters is absent.

Sample DateParameterSampling ResultAllowable Value
Sep 30, 2016 Chlorine residual 2.1 mg/L Minimum value of 0.1 mg/L
Sep 30, 2016 Fluoride 0.73 mg/L 0.6 - 1 mg/L
Sep 30, 2016 pH 8.24 pH units 7 - 10.5 pH units
Sep 30, 2016 Fluoride 0.74 mg/L 0.7 - 0.9 mg/L
Sep 29, 2016 Chlorine residual 2.05 mg/L Minimum value of 0.1 mg/L
Sep 29, 2016 Fluoride 0.75 mg/L 0.6 - 1 mg/L
Sep 29, 2016 pH 8.24 pH units 7 - 10.5 pH units
Sep 28, 2016 Chlorine residual 2.08 mg/L Minimum value of 0.1 mg/L
« Previous Page 1 of 14  Next »

You may contact the facility or the ESRD regional office to receive paper copies of the complete set of reported water quality parameters.

The water quality information on this website is collected by Alberta Environment and Parks under regulatory requirements to operate a waterworks system. This is public information, however, it is not the most current available in time due to reporting schedules. Most information here is 30 to 60 days previous, and older.

You are advised to contact either your water provider or Alberta Health Services to determine current water quality for your waterworks system, specifically if there are any advisories in place. If available, service provider contact information and websites are available under the Contact Information link (at the top) once you select a waterworks system.

The materials on this site are provided "as is" without warranties or conditions of any kind either expressed or implied. To the fullest extent possible under applicable law, the Government of Alberta disclaims all warranties and conditions, expressed or implied, including but not limited to, implied warranties or conditions of merchantability and fitness for a particular purpose, non-infringement or other violation of rights. The Government of Alberta does not warrant or make any other representations regarding the use, accuracy, timelines, applicability, performance, security, availability or reliability of this website or any sites linked to this site, or the results from the use of this website or any sites linked to this website, or otherwise respecting the materials on this website or any sites linked to this website.